Discover Our
Features

Wireless Motion/Brightness Sensors

Wireless PIR Motion/Brightness Sensor Ceiling mounted multi-sensor for detection of light and motion.

  • Battery-less motion/brightness sensor is powered by a solar cell module
  • A signal is transmitted upon movement every 100 seconds with a change in brightness of min. 10 lux.
  • Dimensions: 108 x 108mm and 26mm in depth
  • Measuring range of 0 – 512 Lux
  • Detection method: PIR (Passive infrared)
  • Detection range of 5m diameter at a height of 2,5m
  • When motion is detected, a signal is sent immediately and switching take place
  • The time delay is set on the actuator or software which will switch the load off after the time period has elapsed and no movement was detected in the time period
  • FBH is used for light and air-con control, it can also be configured as a security device together with the software

Detection Range

Datasheet
Operation manual
All Devices

Wall Mounted Wireless Motion/Brightness Sensor for wall mounted application

  • Power supply with integrated solar cell requires no installation depth behind the mounting plate. It can be stuck to any flat surface
  • Transmits a signal to the wireless network every 100 seconds with a change in brightness of Min 10 lux. A status message is sent every 20 minutes
  • Dimensions: 80 x 151mm with a 30mm height
  • FBH55 is used for light typically in walkways, stairways and entrances
  • Can also be configured as a security device together with the software
  • Supplied in the same colours as the flat switches
Datasheet
Operation manual

Wireless Window/Door Contact

Window contact for status monitoring of windows and doors, power supplied via the solar cell.

  • Battery-less window contact uses ambient light >50 lux to power the sensor and charges super cap night operation
  • A signal is transmitted when the contact is opened or closed. Every 15 minutes a signal indicating the current status is also transmitted
  • Dimensions
    110 x 19mm, 15mm high
    75 x 25mm, 12mm high
  • Magnet
    23 x 14mm, 6mm high
    37 x 10mm, 6mm high
  • FTK is switching actuators, up to 32 FAIT’s are possible to one actuator
  • FTK is used for heating/cooling element control, status monitoring and as a security device
  • Available colours
    pure white
    silver grey
    anthracite
Datasheet
Operation manual
All Devices

Wireless Window Handle

Window handle for status monitoring for windows.

  • Power supplied via the movement action of the handle. Electrodynamics energy generator
  • A signal is transmitted upon the actuation of the handle
  • Various designs:
    pure white
    aluminium steel
    stainless steel matt
    polished brass

  • Dimensions: 165 x 35mm, 16mm height

  • SRG01 is used for heating/cooling element and status monitoring
  • FHFS with lock
Datasheet
All Devices

Wireless Outdoor Brightness Sensor

Brightness Sensor for Outdoor Lighting

  • The wireless outdoor brightness sensor is powered by a solar module which covers a range from 300 to 30 000 Lux
  • It transmits a signal to the wireless network every time there is a change of more than approx. 500 Lux with approx. 10 seconds
  • If the brightness de os not change, a control signal is sent approx. every 100 seconds
  • Dimensions: 61 x 45mm, 30mm deep
  • FAH is used for blind control, shading elements and daylight harvesting according to the outdoor and indoor light differences
Datasheet
Operation manual
All Devices

Room Sensors- Temperature, Humidity & CO₂

Room sensor for heating, cooling and ventilation

  • Battery-less room sensor harvest it’s own energy through the solar cell for operating power
  • A signal is transmitted every 100 seconds (adjustable) or if there are changes of 0.8K
  • Dimensions: 85 x 85mm, 25mm high
  • Measuring ranges
  • Temperature
    00C – +400C
  • Humidity
    0 – 100 %rH
  • CO₂
    0 – 2000 ppm

Types Available

  • Room temperature sensor
  • Room temperature sensor with set point adjustment
  • Room temperature sensor with set point adjustment, presence key
  • Room temperature sensor with set point adjustment, presence key, fan speed switch
  • Room temperature sensor with set point adjustment, slide switch 0/I
  • Room temperature sensor, CO₂ humidity sensor
Datasheet
All Devices

Wireless Humidity/Temperature Sensors

Wireless temperature sensors and controllers with and without displays as well as humidity /temperature sensors.

  • Battery-less sensor harvests it’s own power supply from an integrated solar cell
  • Dimensions: 55 x 55mm or 63 x 63mm frame system
  • The controller requires no installation depth behind the mounting plate, and can therefore be bonded to any flat surface. Adhesive foil is supplied
  • Available in the same colours as the wireless switches & flat switches

Types Available

  • Humidity/temperature sensor
  • Humidity/temperature sensor with display
  • Temperature sensor with display
  • Temperature sensor
  • Temperature controller with display
Datasheet
Manual – FTF55D
Manual – FTR55D
Manual – FTF55

Waterproof temperature sensors for harsh applications

  • Battery-less operation, powered by a solar cell
  • Has an accuracy of +- 0.8K
  • Data logging every 100 seconds
  • Transmission intervals of every 100 seconds with changes above 1.6K and every 1000 seconds with changes above 1.6K
  • Measuring ranges from -200C – +600C
  • Protection rating IP65

Types Available

  • Outdoor temperature sensor
  • Duct temperature sensor
  • Cable temperature sensor
  • Pipe contact temperature sensor
Datasheet
All Devices

Wireless Hotel Card Switch

Wireless card switch for hotel environments and time delayed off switching.

  • The card switch generates it’s own energy when the card is inserted into the device
  • When the card is inserted a wireless telegram is sent over the wireless network
  • The scope of supply comprises of the two-part card guide in the same colour as the frame and an attachment frame, one mounting base and one adhesive foil
  • Dimensions: 80 x 80mm, 27mm high
  • Available in the same colours as the switches & flat switches
  • FKF is used to switch control loads on a predefined time delay when the card is removed or inserted
Datasheet
Operation manual
All Devices

Wireless Timer

Wireless timer with digital display and 8 channels

  • Power supply of 230V. Only 0.2 watt standby loss
  • Date & automatic summer/winter time changeover
  • Two weeks power reserve
  • Available in the same colours as the switches & flat switched except aluminium
  • Up to 60 timer memory locations are freely assigned to the channels
  • Dimensions: 55 x 55mm or 63 x 63mm frame system
Datasheet
Operation manual
All Devices